SIOEN B6756 MACHINE SKIRT

245cm Roll Width

50m Roll Length

1400 GSM

3 Year Minimum Warranty

View on trade portal

Request a sample

Open a Trade Account

Sioen B6756 is a heavy weight PVC with high Tensile Strength and high Tear Resistance.

Sioen B6756 conforms to ISO 17103:2009 for use on Agricultural Machinery / Protective Skirts – Rotary Disc Mowers, Rotary Drum Mowers and Flail Mowers.

Sioen B6756 is also suitable for heavy duty covers and load slings.

https://sioentechnicaltextiles.com/en/products/b6756

WIDTH: 245cm
ROLL LENGTH: 50m
NOMINAL WEIGHT: 1400gsm
BASE FABRIC: Polyester Panama 2 x 2 1100 Decitex warp x 1670 Decitex weft
COATING: PVC with Lacquer
TEAR STRENGTH WARP/WEFT: 1200 / 1200 N
TENSILE STRENGTH WARP/WEFT: 6000 / 6000 N/5cm
ADHESION: 125 N/5cm
U/V WARRANTY: 3 year minimum
FIRE BEHAVIOUR: <100mm/min (ISO 3795 1989) TEMPERATURE RANGE: -30° / +70° C FABRICATION METHODS: Hot Wedge, Hot Air or High Frequency Welding : Sewing : Adhesive

These instructions will maintain the appearance and extend the functional life of the fabric.
• PVC Coated Fabrics
• Polypropylene Woven Coated Fabrics
• PVC Coated Nylon/Polyester Fabrics

PVC Coated Nylon/Polyester Fabrics
Care instructions relate to PVC coated side only of fabrics with PVC one.

PROHIBITIONS/WARNINGS
• Do not use solvents, abrasives or harsh detergents to clean
• Do not dry clean
• Do not iron

GENERAL CARE INSTRUCTION
A regular wipe over with warm soapy water followed by rinsing with
cold water will remove normal soiling. Where a build-up has occurred,
the surface should be cleaned with a soft brush and mild, non abrasive
detergent, then rinsed thoroughly.

SPOT CLEANING/SPECIAL TREATMENTS
Mildew may be removed by wiping with a cold solution of household
chlorine bleach having 4% chlorine, in the proportion of one part in
four to water. Rinse thoroughly with cold water.

The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.

Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.

The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.

The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.