Sprayable solvent-based Neoprene laminating adhesive for excellent durability.
Quick drying with strong initial grab and very good heat and water resistance. Heat reactivation and high immediate heat resistance. Intermittent oil and petrol exposure.
Available in Natural, or Red for visible indication of spray coverage
For Thinning : Solvent No. 2
For Cleaning: Solvent No.2 or Turps
Recommended Uses
Benchtop laminating where high heat and water resistance are required.
Post-forming rolled edge benchtops, using heat reactivation method.
Ideal for motor-home and marine fit-out work.
Heavy duty bonding of fabrics and textiles.
Also suitable for wood, laminates, rubbers, cementitious materials, fiberglass and common metals such as aluminum and zinc coated surfaces.
Suitable for light duty bonding of plasticised PVC.
Textile applications include Bonding of carpet and lining fabrics, leather, furniture foam.
Not suitable for:
Polyethylene, Polypropylene, Teflon, Plasticized PVC except for low stress bonds, Copper/brass and Polystyrene foam
Key Features:
Neoprene solvent based for excellent durability
Quick drying with strong initial grab
Very good heat and water resistance
Available in Natural, or Red for visible indication of spray coverage
Service Temperature: Continuous -20 to +50°C,
Transient: 160°C
Specifications:
Solids Content: 19%
6 – 10m²/L per surface, depending on surface and application method. Absorbent surfaces may need two coats.
Viscosity: Sprayable
Colour: Red or natural
Tack Time approx 5mins / Open Time up to 30mins
Available in 20ltr (Sprayable)
The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.
Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.
The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.
The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.
Related Products
ADOS F92 GENERAL PURPOSE SPRAYABLE
ADOS F55 GENERAL PURPOSE SPRAYABLE
ADOS F38 HIGH HEAT SPRAYABLE
No results found.