Solvent based Neoprene adhesive for excellent durability and will not stain light coloured cotton-backed PVC fabrics.
Quick drying with long tack life for ease of use. Softer bond line for flexible substrates with very good heat and water resistance.Intermittent oil and petrol exposure.
Available in brushable (Bostik 1181) and sprayable versions (Bostik 1181 S).
Available in natural colour.For Thinning: Solvent No. 2For Cleaning: Solvent No.2 or Turps
Recommended Uses:
For fabric and textiles where high durability, heat and water resistance are required.
Bonding of carpet and lining fabrics, leather, furniture foam and highly loaded fabric joints such as lifting straps.
Motor and marine trim work.
General assembly of wood, laminates, rubbers, cementitious materials, fibreglass and common metals such as aluminium and zinc coated surfaces.
Suitable for light duty bonding of plasticised PVC.
Not suitable for :
Polyethylene, Polypropylene, Teflon, Plasticized PVC except for low stress bonds, Copper/brass and Polystyrene foam
Key Features:
Neoprene solvent based for excellent durability
Will not stain light coloured cotton-backed PVC fabrics
Quick drying with long tack life for ease of use
Softer bond line for flexible substrates
Very good heat and water resistance
Service Temperature: Continuous -20 to +70°C, Transient: 160°C
Available in brushable (Bostik 1181) and sprayable versions (Bostik 1181 S)
Specification:
Solids Content: Brush – 24% Spray – 21%
Coverage: 4 m²/L per surface, depending on surface and application method.
Absorbent surfaces may need two coats.
Viscosity: Brush / Spray
Tack Time approx 5mins / Open Time up to 40mins
Available in 4ltr (Brushable) or 20ltr (Sprayable)
The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.
Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.
The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.
The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.
Related Products
ADOS F55 GENERAL PURPOSE SPRAYABLE
ADOS F38 HIGH HEAT SPRAYABLE
No results found.