MEMOTEX WELDING SCREEN RED F/R U/V

183cm Roll Width

20m Roll Length

1300 GSM

QUV 500hrs Warranty

View on trade portal

MEMOTEX WELDING SCREEN provides protection from the U/V light emitted during the welding process for those on the opposite side of the screen whilst still allowing visibility of those working behind the screen.

Width: 183cm
Roll Length: 20m
Thickness: 1.0mm
Weight: 1300gsm
Shrink Rate: 2.5% Warp / 0.5 Weft (Approximate Only) ASTM D1204
Elongation (%) At Break: 320% Warp / 300% Weft ASTM D882
Hardness (Shore A): 50 ASTM D2240
Tear Strength warp/weft: 588/588/N/5cm ASTM D882
Tensile Strength warp/weft: 2157/1961 N ASTM D882
U/V Warranty: QUV 500hrs
Fire Retardant: AS/NZS 1530.2, B1
Temperature Range: -10° C (Cold crack) / +70° C ISO 4675
Fabrication Methods: Hot Wedge, Hot Air or High Frequency Welding: Sewing: Adhesive

These instructions will maintain the appearance and extend the functional life of the fabric:
• Unsupported PVC Clear and Opaque (tent windows, drop curtains)

PROHIBITIONS/WARNINGS
• Do not dryclean
• Do not iron
• Do not use a stiff brush, vigorous rubbing or tumble drying
• Do not use abrasive cleaners
• Keep away from solvents such as petrol, acetone or similar which may attack PVC

GENERAL CARE INSTRUCTION
Vacuum regularly using low suction to remove loose dirt.
Clean regularly with hot or warm soapy water and a soft brush, or light

SPOT CLEANING/SPECIAL TREATMENTS
Treat stains as soon as possible. Test on an inconspicuous area first before
proceeding. Mildew may be removed by wiping with a cold solution of sodi
um hypochlorite having 4% chlorine, in the proportion of 1 part to 4 of water.
Rinse thoroughly with cold water. Grease spots may be removed carefully by
rubbing lightly with a soft cloth and some ethanol (ethyl alcohol). Scuffs and/
or scratches can be removed by polishing with a special compound recom
mended by the manufacturer.

The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.

Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.

The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.

The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.