SIOEN AQUALITE PVC D2360
218cm Roll Width
50m Roll Length
360 GSM
10 Year Warranty
View on trade portal
SIOEN AQUALITE D2360 is a lightweight dual coated-PVC technical textile specifically designed for maritime covers and enclosures.
Key Specifications
Finish: Features a special “boat” embossing that provides a subtle leather-like look.
Durability: The fabric is UV-stabilised and treated with anti-bacterial agents to resist sunlight degradation and mould in marine environments.
Primary Applications
Boat Covers: Protecting power boats and sailing boats from UV rays and rain.
Lightweight Enclosures: Suitable for yachting applications where a lower-weight, professional PVC fabric is preferred.
WIDTH: 218cm
ROLL LENGTH: 50m
NOMINAL WEIGHT: 360gsm
BASE CLOTH: 280dtex Polyester 100%
COATING: PVC 100%
SURFACE FINISH: Embossed Leather Pattern, Semi Dull Lacquer
TEAR STRENGTH WARP/WEFT: 1300/1300 N/5cm
TENSILE STRENGTH WARP/WEFT: 70/60 N
ADHESION: 60 N/5cm
TEMPERATURE RANGE: -40/+70°C
U/V STABILISED: 7-8 Light Fastness / 5year Warranty
ANTI BACTERIA: Mould and Mildew Resistant
These instructions will maintain the appearance and extend the functional life
of the fabric:
FABRICS
• PVC Coated Fabrics
• Polypropylene Woven Coated Fabrics
• PVC Coated Nylon/Polyester Fabrics
Care instructions relate to PVC coated side only of fabrics with PVC one side
coating
PROHIBITIONS/WARNINGS
• Do not use solvents, abrasives or harsh detergents to clean
• Do not dry clean
• Do not iron
GENERAL CARE INSTRUCTION
A regular wipe over with warm soapy water followed by rinsing with cold
water will remove normal soiling. Where a build-up has occurred, the surface
should be cleaned with a soft brush and mild, non abrasive detergent, then
rinsed thoroughly.
SPOT CLEANING/SPECIAL TREATMENTS
Mildew may be removed by wiping with a cold solution of household chlorine
bleach having 4% chlorine, in the proportion of one part in four to water.
Rinse thoroughly with cold water.
The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.
Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.
The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.
The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.
Downloadable Guides
Technical Specifications
Colour Chart
Care Instructions
Related Products
No results found.