R134 VINYL

WIDTH: 137cm
ROLL LENGTH: 30m
NOMINAL WEIGHT: 530gsm
THICKNESS: 0.9mm
SURFACE: Polyvinyl Chloride (PVC)
BACKING: Polyester Terry Fabric 100%
ABRASION RESISTANCE: 30,000 + Double Rubs Wyzenbeck ASTM D 4157-13
U/V RESISTANCE: 500hrs ASTM G 154-12a
COLD CRACK: -23°C Federal Standard No.191A-Method 5874

These instructions will maintain the appearance and extend the functional life of the fabric:
• PVC Vinyl Leathercloths
• Stretch Knit Back PVC Upholstery Fabrics

PROHIBITIONS/WARNINGS
• Do not machine wash
• Do not dryclean
• Never use furniture polish, abrasive cleaners or steel wool. Regular use of
cleaners containing hydrocarbons or similar additives may cause damage
to the vinyl and harden the surface. Strong detergents like acetone or
similar are detrimental to the vinyl surface
• Avoid exposure to excessive heat and non-colour fast dyestuffs found in
some articles of clothing as they may transfer dye to the vinyl

GENERAL CARE INSTRUCTION
Do not remove any part for separate cleaning. Regular cleaning of head-rests,
arms and seat cushions is important to remove body oils which can cause
hardening of the surface. To clean, wipe with a cloth or sponge which has
been moistened in warm soapy water, then dry with a soft clean cloth. The
use of mild non abrasive pure soap is recommended. Stubborn grime may
require gently scrubbing with a soft brush.

SPOT CLEANING/SPECIAL TREATMENTS
Treat spills and stains as soon as possible. Gently remove any soil or mop
liquids from the surface. Do not scrub with a stiff brush. Apply proprietary
cleaning agents strictly in accordance with instructions. Test on an inconspic
uous area before use.

The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.

Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.

The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.

The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.