BOSTIK WB1133 SPRAYABLE ADHESIVE

View on trade portal

Wiggins WB1133 trim and general-purpose adhesive has been developed as a general-purpose contact adhesive possessing long open tack time coupled with moderately high heat resistance and extra bond strength.

WB1133 does not stain light coloured cotton backed PVC/Vinyl material under the influence of ultraviolet light and is therefore ideally suited for motor trim work and other products such as rubber, metal, foam, leather, linings, cotton backed vinyl’s, etc.

It can be applied by brush, spray or roller. Versatile for bonding most common substrates. Can be heat reactivated. Good heat and water resistance. Intermittent oil and petrol exposure. Available in Natural, or Red
For Thinning: Solvent No. 2
For Cleaning: Solvent No.2 or Turps

Key Features:

High performance Neoprene formulation
Can be applied by brush, spray or roller
Versatile for bonding most common substrates
Can be heat activated
Good heat and water resistance
Service Temperature: Continuous -20 to +80°C, Transient: 160°C

Specifications:

Solids Content: 20%
Coverage: 6 – 10m²/L per surface, dependent on porosity and application. Absorbent surfaces may require two coats.
Viscosity: Brush / Spray
Colour: Natural / Red
Tack Time 5-10mins / Open Time Contact: 10 – 60 minutes dependant on substrate and temperature Heat activation: 24 hours max.

Available in: 20ltr

The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.

Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.

The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.

The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.

Industries: Automotive & Transport / Upholstery & Furniture

Materials: Adhesives & Chemicals

Brands: Bostik