STAYPUT “T”-LOCK FASTENER

Stayput® Horizontal and Vertical fasteners have provided a reliable, secure, and corrosion free
fixing for over 50 years. However, increasingly customers have been asking for a fastener with
similar characteristics in a more modern design. So with this in mind we set about designing a
new fastener that was less obtrusive when covers are removed, a desirable feature for
discerning boat owners.

Introducing the Stayput® T Lock. Now when covers are removed all that remains is a neat, low profile
fixture. The Stayput® T Lock consists of three 100% corrosion free nylon composite
components: a Cap, Key, and Base. There are 2 options for the Base; a low 5mm profile
rectangular base with 2 fixing holes, or a round 8mm profile base with a single fixing hole. Both
bases are designed to be secured using a 6g countersunk screw. The Round Base requires a
suitable adhesive sealant to be applied at installation to ensure it will not rotate during use. The
Cap and Key are installed into the fabric through a sSP4 eyelet or 10mm grommet, and are simply
pressed or tapped together. Once installed the Cap and Key remain attached to the cover. To
secure your cover simply insert the Key into the Base and rotate the Cap ¼ turn clockwise until
engaged with the Base. To remove simply turn the Cap ¼ turn counterclockwise.

Caps: White, Black, Light Grey & Beige
Key: White & Black
Flat Base: White & Black
Round Base: White & Black