STAYPUT “T”-LOCK FASTENERS

View on trade portal

Stayput® Horizontal and Vertical fasteners have provided a reliable, secure, and corrosion free fixing for over 50 years.
However, increasingly customers have been asking for a fastener with similar characteristics in a more modern design.
So, with this in mind we set about designing a new fastener that was less obtrusive when covers are removed, a desirable feature for discerning boat owners.

Introducing the Stayput® T Lock. Now when covers are removed all that remains is a neat, low-profile fixture.
The Stayput® T Lock consists of three 100% corrosion free nylon composite components: a Cap, Key, and Base.
There are 2 options for the Base: a low 5mm profile rectangular base with 2 fixing holes, or a round 8mm profile base with a single fixing hole.
Both bases are designed to be secured using a 6g countersunk screw. The Round Base requires a suitable adhesive sealant to be applied at installation to ensure it will not rotate during use.
The cap and Key are installed into the fabric through a SP4 eyelet or 10mm grommet and are simply pressed or tapped together.
Once installed the Cap and Key remain attached to the cover. To secure your cover simply insert the Key into the Base and rotate the Cap ¼ turn clockwise until engaged with the Base.
To remove simply turn the Cap ¼ turn counterclockwise.

Caps: White, Black, Light Grey & Beige
Key: White & Black
Flat Base: White & Black
Round Base: White & Black

The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.

Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.

The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.

The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.

Industries: Marine

Materials: Hardware & Fittings

Brands: Stayput