COMMANDER + COMMANDER XTRA

205cm & 320cm Roll Width

50m Roll Length

240 & 260 GSM

3 Year Minimum Warranty

View on trade portal

Request a sample

Open a Trade Account

Commander + Commander Xtra – UV-Stabilised Waterproof Polyester Fabric.

Commander is a Solution dyed U/V stabilised Polyester fabric with a 1000mm PU backing for high water repellancy.

Commander is a durable light weight choice for boat covers, storage covers, furniture covers etc.

205cm Standard range available in 5 colours
320cm Xtra Wide range available in 2 colours

WIDTH: 205cm / 320cm (Xtra)
ROLL LENGTH: 50m
NOMINAL WEIGHT: 240gsm / 260gsm +/- 20gsm (Xtra)
BASE FABRIC: 100% Solution Dyed Polyester
COATING: PU Coating on underside
HYDROSTAT: ≥1000mm minimum AATC 127
WATER REPELLANCY: ≥90 AATC 22
TEAR STRENGTH WARP/WEFT: 76 / 67 N AATC D1424 / 64 / 64 N ASTM D1424 (Xtra)
COLOUR FASTNESS: 4/5 (Face) AATC 16E / 4.5/5 (Face) AATC 16E (Xtra)
U/V WARRANTY: 3 year minimum
FABRICATION METHODS: Sewing

These instructions will maintain the appearance and extend the functional life of the fabric:
• Acrylic Canvas
• Nylon or Polyester Cloth (coated or uncoated)

PROHIBITIONS/WARNINGS
• Do not dryclean
• Avoid the use of soap and detergents, cleaning fluids or insecticides as they may damage the coating and promote leakage
• Avoid machine washing as it may remove surface coatings
• Hand washing is preferable
• For maximum durability, use moderate cleaning methods

GENERAL CARE INSTRUCTION
Sponge or hose regularly. More stubborn stains can be sponged with a
very weak liquid soap solution then hosed or rinsed thoroughly. Care
instructions cover most outdoor applications

SPOT CLEANING/SPECIAL TREATMENTS
Regular dry brushing using a SOFT brush followed by sponging with warm
wa¬ter will remove most normal soiling. After regular cleaning, these fabrics
may lose their water repellent finish. A water repellent coating can be re-ap
plied by using a proprietary brand of fabric protector that is recommended
for each type of fabric.

The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.

Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.

The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.

The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.