Polyurethane heat resistant high strength PVC adhesive with excellent creep resistance. Very good plasticizer resistance, low staining, excellent UV resistance and good brushability. Heat-reactivated and Desmodur RFE modifiable Use as 1 part or 2 part depending on performance requirements. Available in clear colour
For Thinning: Solvent No. 4
For Cleaning: Solvent No.4
Recommended Uses:
Common shoe industry materials
PVC inflatable boats*
PVC truck sidings
PVC inflatable goods
PVC bonding where high moisture resistance is required*
* 2 Part adhesive system required
Not suitable for: Polyethylene, polypropylene, Teflon and Polystyrene foam
Key Features:
Outstanding heat resistance 180° Peel test Greater than 10Kg/25mm
High strength
Excellent creep resistance
Very good plasticizer resistance
Low staining
Excellent UV resistance
Good brushability
Use as 1 part or 2 parts depending on performance requirements
Specifications:
Solids Content: 18%
Coverage: 2.5 – 4 m²/L per surface, depending on surface and application method. Absorbent surfaces may need two coats.
Viscosity: Brush
Colour: Clear
Open Time: 5 – 20mins, Heat re-activation up to 7 days
Available in: 1ltr, 4ltr, 20ltr
The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.
Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.
The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.
The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.
Related Products
BOSTIK SOLVENT NO.4
BOSTIK SOLVENT NO.2
No results found.