TEARLOK® BISON II
205cm Roll Width
40m Roll Length
615 GSM
View on trade portal
Tearlok® Bison II is an incredibly high strength heavy weight 100% core spun canvas fabric, with a two-way rip stop woven construction with a square design grid.
Tearlok® Bison II is manufactured using the superior DDP (Defab Duraproofing Process) coupled with the latest advancements in weaving technology. When outdoor protection needs to adjust to constantly altering weather, road or terrain conditions, Bison II guarantees a canvas that will ensure protection from the toughest and the most arduous conditions (18oz proofed).
Tearlok® Bison II is ideal for applications such as heavy-duty long-haul road transport tarpaulins, utility and 4WD covers, heavy duty horse rugs & blankets, industrial covers & curtains, shipping /rail transport covers.
Key Features:
Australian Made
High Tear resistance /Highly abrasive resistant two-way Rip Stop Construction
Highly waterproof /Superior hydrostatic water resistance
Completely breathable /Guaranteed not to sweat
Exclusive DDP (Defab Duraproofing Process)
Dimensionally Stable /Shrinkage resistance
Mould, Rot and Mildew Resistant
Crease Whitening Resistant /Optimum fabric colour fastness
Maximum UV Stability /Effective light and heat control
Key Benefits:
Guaranteed 5 years
Environmentally friendly
Easy to care and maintain
WIDTH: 205cm
ROLL LENGTH: 40m
NOMINAL WEIGHT: 615gsm
BASE FABRIC: 52% Polyester / 48% Cotton, Ripstop 100% Corespun
SHRINKAGE WARP/WEFT: 1.6% / 0.3%
TENSILE STRENGTH WARP/WEFT: 2165 / 2620 N/5cm AS 2001.2.3
TEAR STRENGTH WARP/WEFT: 239 / 186 N AS 2001.2.10
HYDROSTATIC HEAD: >122mbar / 12.2kpa / 1220mm AS 2001.2.17
CONE TEST: 0ml (24 Hours) AS 2001.2.18
RUB FASTNESS: Dry 4/5 Wet 4/5 AS 2001.4.3
U/V STABILITY: 5 years
FABRICATION METHODS: Sewing
These instructions will maintain the appearance and extend the functional life of the fabric:
• Polyester/Cotton Blend Proofed Canvas
• Polyester Proofed Canvas
• Cotton Proofed Canvas
PROHIBITIONS/WARNINGS
• Do not dry clean
• Avoid the use of soap and detergents, cleaning fluids or insecticides as they may damage the coating and promote leakage. If the canvas is machined washed, it may remove any coating or waterproofing properties from the surface. Never scrub the surface
• Do not store directly on concrete
• Do not expose to petrol, oil or solvents
• Ensure product is completely dry prior to storage
GENERAL CARE INSTRUCTION
Regular cleaning with plenty of water and a soft brush will remove most dust and dirt. Always clean from the lower edges of the fabric working upwards.
Canvas roofing should be cleaned regularly. Do not allow bird droppings, earth and or vegetable matter to remain in contact with the fabric. New canvas should be thoroughly wet before use and allowed to dry to ensure sealing up of the seams.
SPOT CLEANING/SPECIAL TREATMENTS
For the removal of mildew or more stubborn stains, use a proprietary brand of mildew remover, or mix 1 part household chlorine bleach to 4 parts water and sponge into the canvas. Allow 15 minutes contact then hose or rinse thoroughly. With age, use and repeated cleaning, there will be a loss of waterproofness. The canvas can be reproofed by using the appropriate proofing agent that is recommended for each type of canvas.
The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.
Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.
The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.
The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.
Related Products
No results found.