SUNCOOL INTERNAL BLIND MESH

300cm Roll Width

30m Roll Length

440 (3%), 410 (5%), 365 (10%) GSM

5 Year Minimum Warranty

View on trade portal

Request a sample

Open a Trade Account

Suncool Mesh range (3%, 5% and 10% Openness factors) offers tailored solutions for glare, heat and UV management, balancing comfort and outward visibility across commercial and residential spaces.

Key Features:

Greenguard Gold
Bacteria / Fungal Resistance
Heavy Metal Free (Pb free)
Fire Resistant
Excellent Colour Fastness

WIDTH: 300cm
ROLL LENGTH: 30m
NOMINAL WEIGHT: 440gsm (3%) 410gsm (5%) 365gsm (10%)
FABRIC COMPOSITION: 30% Polyester + 70% PVC
YARN COUNT: 54 * 44 (3%) 48 * 46 (5%) 40 * 42 (10%)
THICKNESS: 0.65mm (3%) 0.55mm (5%) 0.52mm (10%)
TENSILE STRENGTH WARP/WEFT: 1800 x 1434 N/5cm (3%) 1600 x 1500 N/5cm (5%) 1240 x 1230 N/5cm (10%)
COLOUR FASTNESS: GB/T 8427-2008 Grade 8
U/V WARRANTY: 5 year minimum
FIRE RETSISTENCE: B1 (GB8624), NFPA701, NFPA 701-99 TM#1, CSFM Title 19, EN 13773, CAN/ULC-S109-19
TEMPERATURE RANGE: -30° / +70° C
HEALTH CERTIFICATION: Greenguard Gold, Reach, China Environmental Labelling, GB/T 2912.1-2009, SGS
BACTERIA / FUNGAL RESISTANCE: ASTM G21, GB/T 31402-2015/ISO 2219:2007(IDT)
FABRICATION METHODS: Cutting: Cold cut / Ultrasonic / Crush cut Seaming/Hemming: Thermal / High-Frequency / Ultrasonic / Sewing

CARE & CLEANING

Remove dust with vacuum cleaner or compressed air.
Do not use solvents or any abrasive substance which might damage the coating
of the fabric.
Rinse with clean water. Leave shade down until completely dry.
You can also rub the fabric very gently with a clean white pencil eraser to
remove small stains

The customer must inspect the goods upon delivery and report any defects, shortages, damage, or mismatches within 10 days. The company must be given a reasonable chance to inspect any allegedly defective goods. If no notice is given within the timeframe, the goods are considered accepted and free from defects. If the company agrees the goods are defective, it may choose to repair or replace them.

Returns are only accepted if the company approves them in writing, the goods are returned within 7 days at the customer’s expense, and the goods are unused, properly stored, and returned in near-new condition with original packaging and materials.

The company will not accept returns for customised goods, cut textile products, altered or tampered goods, indent goods, or goods that were improperly stored or handled by the customer.

The company may charge a handling fee of 20% of the returned goods’ value (or $100 minimum) and/or return freight costs if the return is due to the customer’s fault or omission.