BOSTIK WB1133 Sprayable Adhesive

Wiggins WB1133 trim and general-purpose adhesive has been developed as a general purpose contact adhesive possessing long open tack time coupled with moderately high heat resistance and extra bond strength.

WB1133 does not stain light coloured cotton backed PVC/Vinyl material under the influence of ultra violet light and is therefore ideally suited for motor trim work and other products such as: rubber, metal, foam, leather, linings, cotton backed vinyls, etc.

It can be applied by brush, spray or roller. Versatile for bonding most common substrates. Can be heat reactivated. Good heat and water resistance. Intermittent oil and petrol exposure. Available in Natural, or Red
For Thinning : Solvent No. 2
For Cleaning: Solvent No.2 or Turps

Key Features:

• High performance Neoprene formulation
• Can be applied by brush, spray or roller
• Versatile for bonding most common substrates
• Can be heat activated
• Good heat and water resistance
• Service Temperature: Continuous -20 to +80°C, Transient: 160°C

Specifications:

• Solids Content: 20%
• Coverage: 6 – 10m²/L per surface, dependent on porosity and application. Absorbent surfaces may require two coats.
• Viscosity: Brush / Spray
• Colour: Natural / Red
• Tack Time 5-10mins / Open Time Contact: 10 – 60 minutes dependant on substrate and temperature Heat activation: 24 hours max.

Available in: 20ltr